Wilson Audio Alexx V Now Official

Posted on 29th March, 2021

Wilson Audio Alexx V Now Official

We brought you early news of Wilson Audio's Alexx V, and now it has gone official; we can share more details and features of the American brand's new and improved Alexx loudspeaker.

Firstly, Wilson Audio is keen to underline just how different Alexx V is from the preceding version. It is instantly evident that Alexx V shares the same skeletonised architecture as seen on the WAMM Master Chronosonic and the Chronosonic XVX. This then brings in the need for the gantry grilles to be seamlessly attached via embedded magnets. Interestingly, Alexx Vs overall size is only 1-inch deeper and 1-inch taller than Alexx Series 1 and remains the same width as Alexx Series 1.

Wilson Alexx V

That said, Wilson has kept the Midrange – Tweeter – Midrange (MTM) design geometry of the original Alexx. However, we are assured that considerable time has been put into advancing critical components of the loudspeaker's sound characteristics. The time-alignment accuracy of Alexx V is much closer to the XVX, apparently giving this system the ability to recreate micro-detail one would expect from a much larger system.

Alexx V is equipped with the new 7-inch Alnico QuadraMag developed for XVX, partnered with the 5.75-inch mid-woofer used in the original Alexx, TuneTot, and SabrinaX. Additionally, it benefits from the new AudioCapX-WA capacitors in its crossovers. These are uniquely wound at Wilson Audio to tight tolerances, we are told. Furthermore, there have been several crossover changes resulting in fewer components in the signal path. Wilson says that it has fine-tuned and modified the system for better Impedance and Sensitivity measurements — From a minimum impedance measurement of 1.5 ohms (Alexx) to 2.0 ohms (Alexx V). Alexx V is +1dB more sensitive than Alexx Series 1.

Wilson Alexx V

According to Wilson Audio, behind the midrange drivers, internal wave diffusers have been machined directly into the material to further aid the resolving power of these drivers and dramatically increase the system's settling speed. We are told to expect a more lifelike reproduction of midrange tone, expression, and accuracy in these remarkable midrange drivers.

Also new for Alexx V is Wilson's in-house 3D printed carbon fibre Convergent Synergy Carbon (CSC) Tweeter rear-wave chamber. The manufacturer states that this unique design provides greater high-frequency extension, more linear frequency response, and better harmonic detail.

Wilson Alexx V

Wilson Audio originally developed the 10.5-inch and 12.5-inch woofers in conjunction with the WAMM Master Chronosonic. Here they have been carefully optimised for Alexx V's enclosure, which has +16% more internal volume than the original Alexx. The net result is that Alexx V features almost the same internal woofer volume as the Chronosonic XVX, boasts Wilson. Overall, Wilson Audio states Alexx V has a 20 Hz – 32 kHz +/- 3 dB frequency response with a 92 dB @ 1W @ 1m @ 1k claimed sensitivity. Nominal Impedance is rated at 4 ohms with a 2 ohm minimum @ 250 Hz.

Also borrowed from the WAMM Master Chronosonic, Alexx V gets the company's latest cable management system. As well as looking good, this cable management system is said to offer a superior solution to achieving the perfect length of speaker cable for each of the upper modules as they are adjusted for correct time-alignment. As part of this design, there is an illumination cross-brace with a custom-made Sono 1 Coolfall light for ease of installation in low-light environments.

Wilson Alexx V

Alexx V is said to be extraordinarily adaptable, thanks to features such as its XLF reversible woofer port and independently adjustable upper modules. We are told that every driver is now better aligned and more on-axis with the listener. The upshot here is that Alexx V promises outstanding micro-detail and tighter time-alignment accuracy at all listening positions.

Wilson Alexx V

Wilson Audio has also launched its new Acoustic Diode spike system with Alexx V. Featuring a novel combination of austenitic stainless steel and V-Material, it is said to be a significant upgrade to the company's previous solution. This coupling system was created by Wilson Audio's Special Applications Engineering (WASAE) division and has superlative vibration management that reveals far greater dynamic nuances across the entire frequency spectrum.

Wilson Alexx V

Finally, Alexx V sports X-Material enclosures with V-Material nested in strategic locations (gantry cross-brace and the top of the woofer), resulting in Vibration control and upper module isolation close to Chronosonic XVX levels.

The Wilson Audio Alexx V is available to order now with pricing confirmed to be £139,000, including VAT and installation.

Visit Wilson Audio for more information

Gallery

Jay Garrett's avatar

Jay Garrett

StereoNET UK’s Editor and Bass playing gadget junkie. He’s captained the good ship GadgetyNews for over a decade, making low jargon high tech a very handy thing. His passion for gadgets and Hi-Fi is second only to being a touring musician.

Get the latest.

Sign up to discover the best news and reviews from StereoNET UK in our FREE Newsletter.

Posted in: Hi-Fi
Tags: wilson audio  absolute sounds 

JOIN IN THE DISCUSSION

Want to share your opinion or get advice from other enthusiasts? Then head into the Message Forums where thousands of other enthusiasts are communicating on a daily basis.
CLICK HERE FOR FREE MEMBERSHIP

THE LATEST

POPULAR NOW

00001173