New Unison Research Loudspeakers
Unison Research has been building high quality loudspeakers and electronics in Italy for more than 20 years. The Max 1 loudspeaker is a new design optimised for use with their own valve amplifiers.
Max 1 is a two-way floorstanding reflex-loaded system, with substantial internal volume despite a compact footprint. Unison Research says this speaker can also be used in a 2-channel seutp, as well as a front channel in home theatre systems.
The 12” neodymium magnet woofer, made in Italy, is equipped with a diaphragm made from vegetable dough and carbon fibers. Able to dissipate more than 800 watts of continuous power, makes it a perfect match with a high efficiency compression driver. Also made in Italy, it has a titanium diaphragm with a 44 mm aluminum coil and aluminum windings to cancel the stresses and deformations caused by temperature. It is loaded with an elliptical Constant Coverage ESS aluminium horn with wide dispersion (60° x80°).
Unison Research says the Max is incredibly rugged, linear and with a natural sound and free of any nasality. The directivity index is constant within plus or minus 0.85 dB up to more than 12kHz.
The handcrafted crossover is a classic 12 db/octave design, featuring air-wound flat ribbon OFC copper, as well as Solen and Mundorf capacitors and resistors.
One of the design criteria for Max 1 was to make the impedance curve as smooth as possible to reduce the effect of the cables as well as the damping factor of the amplifier (tube or solid state). Cleverly, a selectable switch on the back of the Max changes the damping factor so that the diffuser maintains consistent performance with both valve amplifiers and solid state. While the Max has been optimised for use with tube amps, a simple toggle of this switch will result in excellent results with solid state amplification, according to the manufacturer.
The cabinet is made from 25mm thick MDF veneered in natural wood and further stiffened by internal bracing. The 50mm MDF front panel, is covered in synthetic leather.
To make the connections there are four external terminals to allow bi-amplification.
Unison Research Max 1 will be available in Australia early 2015, with a $8,995 RRP.
- System : Floor standing - front firing Reflex
- Loudspeakers: 1 x 12” woofer, 1 x 1 “ compression driver with titanium diaphragm
- Numbers of ways: 2 way
- Frequency Response: 30-20000 Hz
- Cross-over: Woofer low-pass 12 dB, Tweeter high- pass 12 dB
- Crossover Frequency 2000 Hz
- Power: 500 watt RMS
- Amplifier: from 10 to 200 Watt RMS or more – without clipping
- Sensibility: 94 dB @2.83Vrms/1 meter
- Nominal impedance: 8 ohm
- Size: 95h x 35w x 45d cm
- Weight: 37 Kg
Unison Research is distributed in Australia by Radiance Audio Visual.
Get the latest.
Sign up to discover the best news and reviews from StereoNET UK in our FREE Newsletter.
QED's Performance HDMI Active Optical Cable is Designed For Long Runs and Custom Installations
Kimber Kable KS PHONO Tonearm Cables Available in the UK
Sony WH-1000XM4 Premium Noise-Cancelling Headphones Released
REL Tzero Mk III Subwoofer for Smaller Rooms Released
Linn Majik Network Streaming Hub Totally Revamped
This swish new high end integrated is a sign of changing times, says David Price…
Hana Umami Red Moving Coil Cartridge UK Price Announced
YG Acoustics Founder, Yoav Geva, Leaves The Company After 18 Years
Rafael Todes samples a Japanese silver disc spinner that’s high-end in every way, except its price…
JBL 4349 Studio Monitor Bookshelf Speakers Unveiled for Pro-Grade Home Listening